Table 37: Iax Extension Configuration Parameters - Media - Grandstream Networks UCM6510 User Manual

Skip Voicemail Password
Verification
Disable This Extension
User Settings
First Name
Last Name
Email Address
User Password
Language
SIP Settings
Max Number of Calls
Require Call Token
SRTP
Fax Mode
is recommended to use the random generated password for security
purpose.
When user dials voicemail code, the password verification IVR is skipped.
If enabled, this would allow one-button voicemail access. By default this
option is disabled.
If selected, this extension will be disabled on the UCM6510.
Note:
The disabled extension still exists on the PBX but can't be used on the end
device.
Configure the first name of the user. The first name can contain characters,
letters, digits and _.
Configure the last name of the user. The last name can contain characters,
letters, digits and _.
Fill in the Email address for the user. Voicemail will be sent to this Email
address.
Configure the password for user portal access. A random numeric
password is automatically generated. It is recommended to use the
randomly generated password for security purpose.
Select the voice prompt language to be used for this extension. The default
setting is "Default" which is the selected voice prompt language under web
GUI->PBX->Internal Options->Language. The dropdown list shows all
the current available voice prompt languages on the UCM6510. To add
more languages in the list, please download voice prompt package by
selecting "Check Prompt List" under web UI->PBX->Internal Options-
>Language.
Table 37: IAX Extension Configuration Parameters – Media
Configure the maximum number of calls allowed for each remote IP
address.
Configure to enable/disable requiring call token. If set to "Auto", it might
lock out users who depend on backward compatibility when peer
authentication credentials are shared between physical endpoints. The
default setting is "Yes".
Enable SRTP for the call. The default setting is disabled.
Select Fax Mode. The default setting is "None".

None: Disable Fax. This is the default setting.
UCM6510 IP PBX User Manual
P a g e | 135