Table 19: Iax Extension Configuration Parameters - Grandstream Networks UCM6510 IP PBX User Manual

General
Extension
CallerID Number
Permission
SIP/IAX Password
Enable Voicemail
Voicemail Password
Call Forward Unconditional
Call Forward No Answer
Call Forward Busy
Firmware Version 1.0.0.25
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

Table 19: IAX Extension Configuration Parameters

The extension number associated with the user.
Configure the CallerID Number that would be applied for outgoing calls
from this user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls using this rule. If the
outbound rule privilege is disabled, this option will not take effect.
Configure the password for the user. A random secure password will be
automatically generated
recommended to use this password or other strong password for security
purpose.
Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated. It
is recommended to use the random generated password for security
purpose.
Configure the Call Forward Unconditional target number so that the
incoming call to this extension will be always forwarded to the target
number. If not configured, the Call Forward Unconditional feature is
deactivated. The default setting is deactivated.
Configure the Call Forward No Answer target number so that the
incoming call to this extension will be forwarded to the target number if
the call is not answered until the ringing times out. If not configured, the
Call Forward No Answer feature is deactivated. The default setting is
deactivated.
Configure the Call Forward Busy target number so that the incoming call
to this extension will be forwarded to the target number if the call is
rejected or the extension is in talking/busy status. If not configured, the
Call Forward Busy feature is deactivated. The default setting is
UCM6510 IP PBX User Manual
when the extension is created. It is
Page 67 of 229