CREATE NEW USER
To manually create new user, go to Web GUI->PBX->Basic/Call Routes->Extensions. Click on "Create
New User" and a new window will show to fill in the details. The configuration parameters are as follows.
General
Extension
CallerID Name
CallerID Number
Permission
SIP/IAX Password
Enable Voicemail
Voicemail Password
Email Address
Call Forward Unconditional
Call Forward No Answer
Call Forward Busy
Ring Timeout
Technology
Firmware Version 1.0.0.32
EXTENSIONS
Table 14: Extension Configuration Parameters
The extension number associated with the user.
Configure the CallerID Name associated with the user. Number, letter,
or space are allowed.
Configure the CallerID Number that would be applied for outbound calls
from this user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Select permission for the user. The available permissions are Internal,
Local, National and International. The default permission is Internal.
Configure the password for the user. A random secure password will be
automatically generated. It is recommended to use this password for
security purpose.
Enable Voicemail for the user. The default setting is enabled.
Configure Voicemail password (digits only). A random numeric
password is automatically generated.
Fill in the Email address for the user.
Configure the Call Forward Unconditional target number. If not
configured, the Call Forward Unconditional feature is deactivated.
Configure the Call Forward No Answer target number. If not configured,
the Call Forward No Answer feature is deactivated.
Configure the Call Forward Busy target number. If not configured, the
Call Forward Busy feature is deactivated.
Configure the number of seconds to ring the user before sending to the
user's voicemail (if enabled) or hangup. The default setting is 60
seconds.
UCM6102/6104/6108/6116 USER MANUAL
Page 40 of 108