Applying Vlan Filter Policies To A Ring Port - Alcatel-Lucent 7705 Configuration Manual

CLI Syntax:
Example:
A:ALU-48>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
...
...
#------------------------------------------
A:ALU-48>config>router#

Applying VLAN Filter Policies to a Ring Port

VLAN filter policies can be applied to a ring port on the 2-port 10GigE (Ethernet) Adapter
card and 2-port 10GigE (Ethernet) module. The filter operates on ingress traffic. Filter
policies must be created before they can be applied. Create filter policies in the
config>filter context.
CLI Syntax:
Example:
A:ALU-48>config>port>ethernet# info
#------------------------------------------
...
...
#------------------------------------------
A:ALU-48>config>port>ethernet#
7705 SAR OS Router Configuration Guide
config>router# interface ip-int-name
egress
filter ipv6 ipv6-filter-id
ingress
filter ipv6 ipv6-filter-id
config>router# interface to-104
config>router>if# ingress
config>router>if>ingress# filter ip 10
config>router>if# exit
interface "to-104"
address 10.0.0.10/32
port 1/1/1
ingress
filter ip 10
exit
exit
config>port>ethernet# vlan-filter filter-id
config>port>ethernet# vlan-filter 2
vlan-filter 2
Filter Policies
313