Configuration Notes
VLAN Filters
Filter Logs
Reference Sources
For information on supported IETF drafts and standards, as well as standard and proprietary
MIBs, refer to
290
•
VLAN filters are applied to physical ring ports on the 2-port 10GigE (Ethernet)
Adapter card and 2-port 10GigE (Ethernet) module. VLAN filters are exclusive to
the ring adapter card and module.
•
Only one VLAN filter is allowed per ingress ring port.
•
The same VLAN filter can be applied to both ring ports.
•
The forwarding action sends packets to the other ring port or to the v-port, depending
on the packet's destination.
•
The 7705 SAR does not support filter logging or statistics collection for VLAN
filters.
•
Summarization logging is the collection and summarization of log messages for one
specific log ID within a period of time.
•
The summarization interval is 100 s.
•
The filter log can be applied to IP filters, MAC filters, or CPM filters.
•
For VPLS scenarios, both Layer 2 and Layer 3 are applicable.
→ Layer 2: source MAC or (optionally) destination MAC
→ Layer 3: source IPv6 or (optionally) destination IPv6 for Layer 3 filters
•
Upon activation of a fixed summarization interval, a mini-table with source/
destination address and count is created for each filter type (IP, MAC, or CPM).
•
Every received log packet is examined for the source or destination address.
•
If the log packet (source/destination address) matches a source/destination address
entry in the mini-table (meaning that a packet was received previously), the summary
counter of the matching address is incremented.
Standards and Protocol
Support.
7705 SAR OS Router Configuration Guide