Management - Cisco Catalyst 4500 series Administration Manual

About IPv6
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-qos.html

Management

The following management features are supported for IPv6 on the Catalyst 4500 series switch:
•
•
•
•
•
•
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-mng_apps.html
Multicast
Traditional IP communication allows a host to send packets to a single host (unicast transmission) or to
all hosts (broadcast transmission). IPv6 multicast, allows a host to send a single data stream to a subset
of all hosts (group transmission) simultaneously.
The following multicast features are supported for IPv6 on the Catalyst 4500 series switch:
•
•
•
•
•
•
•
•
•
•
You can find information about these features at this location:
http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-multicast.html
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
55-4
Ping
Syslog
Netconf support
SNMP
SOAP
HTTP(s)
Multicast Listener Discovery (MLD) protocol, versions 1 and 2
You can find information about IPv6 MLD Snooping at this location:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/53SG/configuration/mldsnoop.h
tml
PIM Sparse Mode (PIM-SM)
PIM Source Specific Multicast (PIM-SSM)
Scope boundaries
MLD access group
PIM embedded Rendezvous Point (RP) support
Static multicast routing (mroute)
Explicit tracking of receivers
Bootstrap routers (BSR)
MLD snooping
Chapter 55 Support for IPv6
OL_28731-01