Configuring Y.1731 (Ais And Rdi) - Cisco Catalyst 4500 series Administration Manual

Configuring Y.1731 (AIS and RDI)

The Catalyst 4500 series switch supports Y.1731 Ethernet Alarm Indication Signal function (ETH-AIS)
and Ethernet Remote Defect Indication function (ETH-RDI) to provide fault and performance
management for service providers in large networks. This chapter describes how to configure Y.1731
ETH-AIS and ETH-RDI.
This chapter contains these sections:
•
•
•
•
For complete command and configuration information for Y.1731, see the Cisco IOS feature module at
this URL:
http://www.cisco.com/en/US/docs/ios-xml/ios/cether/configuration/12-2sr/ce-cfm-y1731.html
AIS and RDI Terminology
Term
CC
CCM
CCDB
CFM
EI
EVC
LMEP
MEP
MIP
OL_28731-01
AIS and RDI Terminology, page 67-1
About Y.1731, page 67-2
Configuring Y.1731, page 67-4
Displaying Y.1731 Information, page 67-6
C H A P T E R
Definition
Ethernet OAM Continuity Check
Ethernet OAM Continuity Check Message
Ethernet OAM Continuity Check Database
Ethernet Connectivity Fault Management
Ethernet Infrastructure or EVC Infrastructure
Ethernet Virtual Circuit
Local Mep
Maintenance Endpoint
Maintenance Intermediate Point
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
67
67-1