Cisco Catalyst 4500 series Administration Manual page 1597

Chapter 65 Configuring Flexible NetFlow
Table 65-3
Field
protocol
source address
traffic-class
Routing Attributes
forwarding-status
Layer 4 Header Fields
Field
TCP Header Fields
destination-port
TCP destination
number
flags [ack] [fin]
[psh] [rst] [syn]
[urg]
source-port
UDP Header Fields
destination-port
source-port
ICMP Header Fields
code
type
IGMP Header Fields
type
Interface Fields
input
output
Flexible NetFlow feature related fields
direction: input
Counter Fields
bytes
bytes long
packets
OL_28731-01
Options Available through FNF and the Supported Fields
Description
IPv6 next header type in
the last IPv6 extension
header
IPv6 source address
IPv6 traffic class
Forwarding status for the
packet (forwarded,
terminated in the router,
dropped by ACL, RPF,
CAR)
Description
TCP destination port
TCP flags.
TCP source port
UDP destination port
UDP source port
ICMP code
ICMP type
IGMP
Input interface index
Input interface index
32 bit counters
64 bit counter
32 bit counters
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
Comments
Yes
Supported as a non-key field
Comments
Supported as non-key fields.
Output interface can be supported
only as non-key.
VSS Environment
65-7