Figure 6-4. Com - Lan /Internet Manual Configuration - Teledyne T200 Operation Manual

Communications Setup and Operation
SETUP X.X
ID
INET
SAMPLE
8
DHCP: ON is
SETUP X.X
default setting.
Skip this step
if it has been
SET>
set to OFF.
SETUP X.X
SETUP X.X
<SET SET> EDIT
SETUP X.X
<SET
SETUP X.X
<SET
SETUP X.X
<SET
Pressing EXIT from
any of the above
display menus
causes the Ethernet
option to reinitialize
SETUP X.X
its internal interface
firmware
SETUP X.X
130
Teledyne API – T200 NO/NO
COMMUNICATIONS MENU
COM1 COM2
ENTER SETUP PASS : 818
1 8 ENTR
DHCP: ON
EDIT
DHCP: OFF
EDIT
SET>
INST IP: 000.000.000.000
GATEWAY IP: 000.000.000.000
SET> EDIT
SUBNET MASK:255.255.255.0
SET> EDIT
TCP PORT 3000
EDIT
INITIALIZING INET
...
INITIALIZING INET 100%
INITIALIZATI0N SUCCEEDED
SETUP X.X
ID INET
Figure 6-4. COM - LAN /Internet Manual Configuration
Internet Configuration Button Functions
BUTTON
EXIT
Location of cursor. Press to cycle through the range of
[0]
numerals and available characters ("0 – 9‖ & ― . ‖)
<CH CH> Moves the cursor one character left or right.
Deletes a character at the cursor location.
DEL
Accepts the new setting and returns to the previous
EXIT
ENTR
menu.
Ignores the new setting and returns to the previous
EXIT
menu.
Some buttons appear only when relevant.
EXIT
EXIT
EXIT
SETUP X.X
INST IP: [0] 00.000.000
<CH CH> DEL [0]
EXIT
SETUP X.X
GATEWAY IP: [0] 00.000.000
<CH CH> DEL [?]
EXIT
SETUP X.X
SUBNET MASK:[2]55.255.255.0
<CH CH> DEL [?]
EXIT
The PORT number must remain at 3000.
Do not change this setting unless instructed to by
Teledyne Instruments Customer Service personnel.
0%
SETUP X.X
INITIALIZATION FAILED
COMMUNICATIONS MENU
COM1 COM2 EXIT
/NO Analyzer Operation Manual
2 X
FUNCTION
location is
indicated by
brackets
ENTR EXIT
ENTR EXIT
ENTR EXIT
Contact your IT
Network Administrator
06858E DCN7057
Cursor