Jackson crew series Installation, Operation And Service Manual page 29

DRAIN QUENCH KIT INSTRUCTIONS
3. Connect user-supplied 115V cord (from facility power) into solenoid box as shown below:
!
CAUTION
Power cannot
be taken from
the machine!
4. Connect cold water to inlet side of solenoid valve.
5. Secure all electrical (ensure connection is to 120V facility power) and plumbing connections.
6. Restore water and power to the machine and verify drain quench performance.
IF THERE ARE ANY ISSUES AFTER INSTALLATION, PLEASE CONTACT
07610-003-78-18-N
DRAIN QUENCH SYSTEM
TECHNICAL SERVICE AT 1-888-800-5672.
INSTALLATION
20