SATO WS408TT Technical Manual page 59

4 SATO WS4 Printer Utility
PAPER JAM
CUTTER ERROR
NO PAPER
HEAD OPEN
ERROR
HEAD ERROR
EXCESS HEAD
TEMP
NO PAPER (Last
label has been
issued)
MEMORY WRITE
ERROR
FORMAT ERROR
MEMORY FULL
SAVING
SAVING ERROR
UPDATING
FIRMWARE NOW
BLUETOOTH
ERROR
WIRELESSLAN
ERROR
UPDATING
FIRMWARE ERROR
UNKNOWN
Description
A paper jam occurred during paper feed.
The cutter is experiencing issues.
The label has run out.
Attempt to feed or issue the label with the top cover (head)
open.
A broken pin has been found on the thermal head.
The thermal head temperature has become excessively high.
The last label has been issued properly and the label has run
out.
An error has occurred while writing data into the flash ROM
or USB memory.
An erase error has occurred in formatting the flash ROM or
USB memory.
Saving failed because of the insufficient capacity of the flash
ROM or USB memory.
In font or PC command save mode. (to flash ROM or to USB
memory)
The flash ROM or USB memory is being initialized.
An EEPROM for backup cannot be read or written properly.
The printer is updating firmware.
Bluetooth initialization error.
Bluetooth setting parameter error.
WirelessLAN initialization error.
WirelessLAN setting parameter error.
An error occurred during the firmware update.
The status is unknown.
56
Work with SATO WS4 Printer Utility