SATO WS408TT Technical Manual page 43

3 System Mode
31. Cutter/Dispenser Offset
Move the cutting line or the peeling position forward or backward. The value in
the angle brackets is the offset unit.
32. IP Address
The static IP address of the printer. The default value is "192.168.1.1".
33. Subnet Mask
The manually specified subnet mask of the printer. The default value is
"255.255.255.0."
34. Gateway
The manually specified gateway of the printer. The default value is "0.0.0.0."
35. MAC Address
The unique address assigned to the printer that connects to the internet.
36. DHCP
When DHCP is enabled, it assigns an IP address to the printer automatically.
37. DHCP Client ID
It is an arbitrary value sent to the DHCP server to reserve an IP address for the
printer.
38. DHCP Host Name
The name of a DHCP client.
39. SNMP
When it is enabled, the host gets or sets parameters registered as SNMP entities.
40. Socket Communication
When it is enabled, the host communicates with the printer via the socket.
41. Socket Port
The socket number of the printer.
42. IPv6 Mode
It determines how you get the IPv6 address of your printer. There are three modes:
MANUAL, DHCPv6 or AUTO.
43. IPv6 Type
It is the IPv6 address type of your printer. There are four types: NONE, NORMAL,
EUI and ANY.
44. IPv6 Address
The static IPv6 address of your printer.
40
Self-Test and Dump
mode
WS4-TT-r01-30-12-16TM