Panel Operation - Toshiba TOSVERT VF-PS1 Instruction Manual

3.2.2 Panel operation

This section describes how to start/stop the motor, and set the operation frequency with the operating panel.
:Set frequency
:Motor starts
RUN
:Stop the motor
STOP
(deceleration stop)
For coast stop
Change the setting of the
parameter
Motor
speed
The operation frequency can
be changed anytime even
during operation.
Changing parameter settings
For control panel operation, parameter settings need to be changed in advance.
If you use parameter
this operation by just making settings once.
Here are the steps to be followed to change the setting to
control panel).
[Setting procedure]
Key operated
EASY
MODE
ENT
ENT
*Pressing the MODE key returns the display to standard monitor mode (displaying operation frequency).
Example of basic connection
Power
supply
.
Coast stop
that makes it possible to select an operation mode in one operation, you can complete
LED display
Displays the operation frequency (operation stopped). (When
standard monitor display selection
Press the EASY key.
(automatic function setting) at the head of the basic parameters
available in quick mode is displayed.
Press the ENTER key to display the parameter setting (Default
setting: ).
Press the
and operation on operation panel).
Press the ENTER key to save the changed parameter.
⇔
parameter are displayed alternately.
C-7
MCCB
R/L1
S/L2
T/L3
Inverter
P24/PLC
RX VI/II RR/S4 PP
CCA
(frequency setting and operation by means of the
Operation
key to change the parameter to
E6581531
Motor
U/T1
IM
V/T2
W/T3
F
R
Shorted by a
shorting bar
when
shipped
PWR
from the
factory.
= [Output frequency])
(Frequency setting
and the
3