Setting Of Optional Meter Outputs; Calibration Of Analog Outputs - Toshiba TOSVERT VF-PS1 Instruction Manual

6.30.2 Setting of optional meter outputs

~
⇒ For details, refer to Instruction Manual (E6581341) specified in Section 6.36.

6.30.3 Calibration of analog outputs

: FM voltage/current output switching
,
,
•Function
Output signals from FM/AM terminals are analog voltage signals. Their standard setting range is from 0 to
10Vdc.
The output current from terminal FM can be changed to 0 to 20mAdc (or 4 to 20mAdc) by changing the settings
of terminal SW2 and a parameter.
[Parameter setting]
Title
Note: To switch to 0-20mAdc (4-20mAdc), set
FM terminals setting example
SW2=OFF ,
(mA)
20
0
SW2=OFF =
(mA)
20
0
The analog output inclination can be adjusted using the parameter
For code data 50 to 64, negative inclination is invalid.
, ~
: FM output gradient characteristic and bias adjustment
: AM output gradient characteristic and bias adjustment
Function
FM voltage/current output
switching
FM output gradient
characteristic
FM bias adjustment
AM output gradient
characteristic
AM bias adjustment
= = (%)
0 100%
Internal calculated value
= =
: Large gain
0 100%
Internal calculated value
F-63
: Meter output settings
Adjustment range
: Voltage 0~10V output
: Current 0~20mA output
: Negative gradient
(descending)
: Positive gradient
(ascending)
- ～ . %
: Negative gradient
(descending)
: Positive gradient
(ascending)
- . %
～
to .
SW2=OFF ,
(mA)
20
4
0
(%)
SW2=OFF =
(mA)
20
4
0
E6581531
Default setting
= = (%)
100%
Internal calculated value
= = (%)
:Small gain
100%
Internal calculated value
6