Invacare MK6i Field Reference Manual page 23

8.5 Using the Mouse Emulator

MOUSE ICONS: The following icons indicate the mouse mode available.
• icon represents the USB Mouse of the IR/Mouse (color MPJ+ joystick) or the
• icon represents the RF Mouse Only module (color MPJ+ joystick, Software Version 2.2.1 or Higher).
To use the Mouse Emulator with a mouse set to 4-QUAD:
1. Enter the Mouse Mode depicted by the mouse mode icon.
2. Use the driver control to move the mouse cursor on the computer.
3. Use a switch plugged into the IR/Mouse Module to issue a left mouse click.
 If a stereo switch is in place, one switch operates a left mouse click, the other operates a right mouse click.
If a user does not have the ability to use a switch for mouse click operation, several "Dwell Click" software programs are
available for purchase and download. Refer to Freeware Dwell Click Software Programs: on page 24.
To use the Mouse Emulator with a mouse set to 3-QUAD:
1. Enter the Mouse Mode depicted by the mouse mode icon.
2. Use the right driver command to move the mouse horizontally, toggling between left and right. The mouse changes horizontal direction with
each successive right driver command.
3. The forward driver command moves the mouse vertically, toggling between up and down. The mouse changes vertical direction with each
successive forward driver command.
4. The left driver command emulates clicking the left mouse button. A sustained left command will select an icon or type an insertion point to allow
for dragging. A second left command will deselect.
Part No 1160891
8 Mouse Emulation Setup Programming and Usage
icon (monochrome joystick).
23
Invacare® MK6i™IR Control/ Mouse Emulation