Invacare MK6i Field Reference Manual page 11

Enabling IR Devices
1. From the main menu of the remote hand help programmer, select <CALIBRATIONS>, then <IR SETTINGS>. There is a list of 6 devices, all set
to NONE.
2. Select <IR DEVICE 1> and then select the device type. There are 7 device choices; TV-BSC (Basic), TV ENH (Enhanced), DVDVCR, CBLSAT,
PHONE, AUD and X10.
3. Next, set the <DEVICE CODE 1>. Locate the appropriate code for device by brand name. Refer to IR Device Codes on page 25.
 There may be multiple codes, selecting the correct code is a matter of trial and error. It is possible that some codes will
operate only some or all of the operations. If none of the codes operate the features, you can use the "learn" feature. Refer
to IR Learning on page 12
A device set up as a VCR or X10 has to be learned to operate.
4. Continue setting the <IR DEVICE 2> through <IR DEVICE 6> and < DEVICE CODE 2> through < DEVICE CODE 6> as desired. There can be
a mix of the same devices, i.e. multiple TV's and multiple DVDs.
5. To use the AbleNet Prism "D" IR Telephone, set the device type to PHONE and the DEVICE CODE to 161.
®
6. When Finished, Press <SAVE>, then Press <SAVE> again as prompted.
Activating IR Control
1. From the main menu of the remote hand help programmer, select <PERFORMANCE ADJUST>.
2. Scroll down to <IR CONTROL>, then scroll across to desired drive for IR use and press <SELECT>
3. Choose 3-QUAD or 4-QUAD to activate the IR Control in that drive. Refer to IR Device Features on page 16.
4. Press <SAVE>, then press <SAVE> again as prompted.
Part No 1160891
5 Infrared Setup, Programming and Usage
11
Invacare® MK6i™IR Control/ Mouse Emulation