Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.
Figure 42: High Temp. Ethernet Cable with M12, RJ45 Connector (E-ETHCBxx)
9.1.4. Low Temp. Ethernet cable with M12 connector (E-ETHLTCBxx)
Use the Low Temp. 4-conductor cable (E-ETHLTCBxx) to connect the Endurance® sensor to
a LAN/Ethernet device. It is a standardized cable, equipped with a D-coded, M12 4-pin
connector type and a RJ45 connector on the counter side, and is suited for industrial Ethernet
applications. The M12 connector is IP67/NEMA 4 rated and has a screw retention feature. Via
the 4-conductor cable, the Endurance® sensor may be powered as a PD (Powered Device)
by a PSE (Power Sourcing Equipment) in a PoE (Power over Ethernet) mode. Refer to PoE
standard IEEE 802.3af, mode A, 10/100 Mbit mixed DC & data. The cable is PUR
(Polyurethane) coated and withstands ambient temperatures from -40 to 105°C (-40°F to
221°F). PUR coated cables are flexible and have well to excellent resistance to against oil,
bases, and acids.
Purchasable Low Temp. Ethernet 4-conductor cables lengths are 7.5m (25ft.), 25m (80ft.),
50m (160ft.), see Table 4.
Figure 43: Low Temp. Ethernet Cable with M12, RJ45 Connector (E-ETHLTCBxx)
9.1.5. Endurance® Terminal Block Accessory (E-TB)
The Endurance® Terminal Block Accessory (E-TB) is for the connection of the Endurance®
sensor to the customer's industrial environment. It lists all different conductor colors on the
right-hand-side and oppositely the related signal names.
Innovative High Temperature Infrared Pyrometers
55