Ethernet Cable (A-Cb-Xx-M12-W04-Xx); Table 7-4: Available Ethernet Cables; Figure 7-6: Ethernet Cable; Figure 7-7: Pin Assignment - Fluke MP Series Abridged User Manual

MP Series
Users Manual, Rev. 1.0, Apr 2021

7.8 Ethernet Cable (A-CB-xx-M12-W04-xx)

The Ethernet cable comes with a four-pin male M12 D-coded connector, assigned to the scanners rear female
M12 connector. The corresponding end of the Ethernet cable is equipped with a general RJ45 snap-in connector.
The LT version of the cable is PUR coated and withstands ambient temperatures up to 80°C (176°F).
The HT version is Teflon coated and withstands ambient temperatures up to 180°C (356°F).
52

Figure 7-6: Ethernet Cable

Figure 7-7: Pin Assignment

RJ45 Plug
1
2
3
6

Table 7-4: Available Ethernet Cables

P/N Length
A-CB-LT-M12-W04-07 7.5 m (25 ft)
A-CB-LT-M12-W04-25 25 m (82 ft)
A-CB-LT-M12-W04-50 50 m (164 ft)
A-CB-HT-M12-W04-07 7.5 m (25 ft)
A-CB-HT-M12-W04-10 10 m (33 ft)
M12 Plug
1
3
2
4
Ambient Temperature
80°C (176°F)
80°C (176°F)
80°C (176°F)
180°C (356°F)
180°C (356°F)