Endurance® Series
Users Manual
5.1.3. Sensor Placement (2-Color Mode)
The following figure demonstrates the sensor placement under various conditions, where valid
2-color temperature measurements are possible. Note, however, that if the sensor signal is
reduced more than 95% (including emissivity and obscuration of the target), the sensor
accuracy also degrades.
14
Sighting hole smaller than
the sensor's field of view
Dirty lens or dirty sighting window
Smoke, steam, dust, gas in atmosphere
Figure 6: Sensor Placement in 2-Color Mode
Emitted
energy
Emitted
energy
Emitted
energy
Emitted
energy
Target smaller than field of view
and / or moves or vibrates in and
out of field of view (e.g. wire)