Kenwood DPX-U5130 Service Manual page 24

4.4 Service Information Clear Mode
Press and hold [2] key and [5] key and reset.
4.4.1 Default condition when the mode is started
It shall be same as normal activation.
4.4.2 Mode structure
Service Information Clear Mode can be executed independent of the current source.
4.4.3 Mode content
After entering this mode, Syscon shall clear the information stored for service and output the result to the display tube.
Display content
D A T A C L R
D A T A C L R
D A T A C L R
The following table shows the data that is cleared.
Information for data clearing
CD mecha information
Service information
DC error information
BT memory information
Tagging information
Backup memory information
Pandora information
SXM memory information
Clearing DATA *1 Hz blinking
When normal end
: O K
When error end
: N G
CD mecha log display
CD load error information display
CD eject error information display
CD time code error count information display (count skip)
CD time code error count information display (no count update)
CD EJECT number of times display
Force Power information display
DC error 1 display (wrong connection & other detection information in de-
tecting duration)
DC error 2 display (capacitor leakage detection number information)
Pairing information
Preset phone number information
Friendly Name (setting)
PINCODE
Phone book in the BT module
MIC Gain
Delay data
Data of iTunes Tagging
Tuner preset (Including Mixed Preset)
Pandora Preset
Preset Channel SID
Preset Skip Channel SID
Parental Lock Code
Preset Locked Channel SID
(No.WA063<Rev.003>)24/31
Details
Details Storage area
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
FLASH memory in the
BT module
E2PROM
FLASH memory in the
BT module
FLASH memory in the
BT module
FLASH memory in the
BT module
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM
E2PROM