Related Manuals for Kenwood DPX-U6120
Summary of Contents for Kenwood DPX-U6120
- Page 1 DPX-U6120 DPX-U5120 DPX-MP3120 DUAL DIN SIZED CD RECEIVER INSTRUCTION MANUAL © 2010 Kenwood Corporation All Rights Reserved. B64-4805-00/01 (M)
-
Page 2: Table Of Contents
Direct music search Initial Settings Direct search in Disc changer (Optional) Demonstration mode Setting Muting volume upon reception of Phone call Tuner Operation Audio Adjustments – DPX-U6120 – Basic Operation Tuner Setting Audio Control Station Preset Memory Preset Equalizer curve Select... - Page 3 DSP Setup Basic Operations of remote control Car Type Selection Appendix Speaker Setting Car Type Fine Adjustments Accessories/ Before installation X’Over Setting Audio Preset Memory Connecting Wires to Terminals Audio Preset Recall Installation Log Function Log Function recall Troubleshooting Guide Log Function item lock Deleting a Log Function item Specifications...
-
Page 4: Before Use
Kenwood dealer. Reset button is pressed. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • Characters that conform to ISO 8859-1 can be displayed. -
Page 5: Component Names And Functions
Component names and functions 1 Disc slot DPX-U6120 DPX-U5120 [iPod] button When inserted a disc (label side up), the source is switched automatically and a song starts playing. Select the iPod source. 2 [0] button DPX-MP3120 [38] button To eject the disc. -
Page 6: General Operation
Demonstration mode can also be cancelled in “DEMO press the [VOL] knob. Mode” of Function setting mode. Refer to <Demonstration Turn the [VOL] knob to adjust the minute, and mode Setting> (page 31). then press the [VOL] knob. DPX-U6120/ DPX-U5120/ DPX-MP3120... -
Page 7: Common Operation
Settings> (page 30). (DPX-U6120 only) • When an optional accessory is connected, the source name [VOL] Auto Memory for each device appears. (DPX-U6120 only) • When connection of the iPod is recognized, the source Audio Control 1 sec. display changes from “USB” to “iPod”. -
Page 8: Ipod/Iphone Operation
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation Select a song Operation type Operation 1 – 6 Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. Skip Search Press the [4] or [¢] button. Return to previous item Press the [ ] button. -
Page 9: Ipod Control By Hand Mode
• This mode is not compatible with music information display. Function of DPX-U6120. The display will show “iPod by Hand Mode”/ “iPod MODE”. Refer to <Direct Search> (page 10). • iPod can be operated when it conforms to the iPod control “Alphabet... -
Page 10: Related Search
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation Related Search Function of DPX-U6120 Direct Search Searches for music of the same artist or genre as the one being played. You can quickly search the desired song by specifying its Search item (artist, album, etc.) and Select iPod source initial. -
Page 11: Alphabet Search
Select the item (artist, album, etc.) you want to search. Enter Alphabet Search mode Press the [3] button. Search for song DPX-U6120 Operation type Operation Select the character Turn the [VOL] knob. Select an item Press the [VOL] knob. -
Page 12: My Playlist
Function of DPX-U6120/ DPX-U5120 iPod/iPhone Operation Turn the [VOL] knob to select “YES”, and then My Playlist press the [VOL] knob. Allows you to register your favorite songs in the “Completed”/ “COMPLETED” is displayed. Playlist of this unit. You can register up to 10 songs Deleting the all song from the Playlist (In in the Playlist. -
Page 13: Usb Device Operation
Function of DPX-U6120/ DPX-U5120 USB device Operation File Search Selecting the file you want to listen to from the 2 – 6 device being played now. Select USB source Press the [SRC] button. Select the “USB” display. Enter Music search mode BAND 4 ¢... -
Page 14: Play Function
Function of DPX-U6120/ DPX-U5120 USB device Operation Play function USB Setting You can select the following USB Setting items. Scan play Select USB source Press the [2] button. Press the [SRC] button. Successively plays the intro of the music in the folder. Select the “USB” display. -
Page 15: Music Cd/ Audio File Operation
• No sound is output while playing Audio file. ON”/ “DISC RANDOM”/ “Folder Random ON”/ Pause and Play “FOLDER RANDOM” is displayed. DPX-U6120 DPX-U5120 Press this button again cancels the Random play. Press the [6] button to pause or resume Repeat play playback. -
Page 16: Direct Music Search
Music CD/ Audio file Operation Function of DPX-U6120 Function of DPX-U6120 with disc changer and remote control Basic Operation of Disc Changer Direct search in Disc changer (Optional) (Optional) Select CD changer source Searching the disc or music by entering the disc or Press the [SRC] button. music number. Select the “CD CH” display. -
Page 17: Tuner Operation
Tuner Operation “Auto Memory”/ Memorizes 6 stations with good reception “AUTO MEMORY” automatically. Refer to <Auto Memory Entry> (page 17). 1 – 6 “Forced MONO”/ Reduces the noise when stereo broadcasts are “FORCED MONO” received as monaural. “ON”/ “OFF” : Factory setting) Make a setting BAND 4 ¢... -
Page 18: Preset Tuning
Press button 92.1 MHz (FM) [9], [2], [1] 810 kHz (AM) [8], [1], [0] Search the frequency Press the [4] or [¢] button on the remote control. Cancelling Direct access tuning Press the [ ] button on the remote control. DPX-U6120/ DPX-U5120/ DPX-MP3120... -
Page 19: Bluetooth Audio Operation
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Audio Operation Basic Operation Selecting Bluetooth Audio source Press the [SRC] button. Select the “BT Audio” display. Pause and play Press the [6] button. 4 ¢ Music Search Press the [4] or [¢] button. ⁄ Connecting a Bluetooth Device • All or some of the operations above cannot be performed if Before use the Bluetooth device, you need to the Bluetooth audio player is not ready for remote control. -
Page 20: Operation Of Hands-Free Phoning
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Operation of hands-free phoning ⁄ • When registering from this unit, refer to <Registering 1 – 6 Bluetooth device> (page 43). Receiving a Call DISP Answering a Phone Call Press the [VOL] knob. 4 ¢ ⁄ • The following operations disconnect the line: Connecting a Bluetooth Device - Insert a CD. -
Page 21: Other Functions
Continuing the Current Call Speed Dialing (Preset Dial) Press the [VOL] knob. Enter Bluetooth mode Turn the [VOL] knob and press it when the Press the [LOG] button for at least 1 second. desired item is displayed. Select the number you want to recall from the Select “REJECT”. -
Page 22: Calling A Number In The Call Log
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Operation of hands-free phoning Calling a Number in the Call log Make a Voice Dialing Call Enter Bluetooth mode Enter voice recognition mode Press the [LOG] button for at least 1 second. Press the [ATT] button for at least 1 second. Select the call log mode “PB Name?”... -
Page 23: Display Of Phone Number Type (Category)
Display of Phone Number type (category) The category items in the Phone Book are displayed as follows: Display Information “General” / “ ” General “Home” / “ Home ” “Office” / “ ” Office “Mobile” / “ ” Mobile “Other” / “ ” Other English... -
Page 24: Display Settings
DISP Enter Function setting mode Press the [VOL] knob. 4 ¢ Enter Display Setting mode Turn the [VOL] knob and press it when the Function of DPX-U6120 desired item is displayed. Display type select > Select “Settings”/ “SETTINGS” “Display & Illumination”/ “DISP & ILLUMI”. -
Page 25: Text Scroll
Light switch of the vehicle. “Manual1”: Dims the illumination constantly. The displayed text scrolls. “Manual2”: Dims the illumination darker than Function of DPX-U6120 Manual1. “OFF”: Does not dim the illumination. Information display setting “ILLUMI Effect” Sets whether the key illumination brightness is You can customize the display of the Spectrum changed in conjunction with the key operation. -
Page 26: Selecting Text Display
Display Settings Function of DPX-U6120 In Music CD source Selecting text display Disc title (“Disc Title”) Spectrum analyzer & Clock (“Speana/Clock”) Track title (“Track Title”) Changes displayed information on each of the Date (“Date”) Play time (“P-Time”) following sources: Blank (“Blank”) Select the source In Auxiliary input source Press the [SRC] button. -
Page 27: Text Display Selection
Function of DPX-U5120/ DPX-MP3120 ⁄ Text Display Selection • Setting is available when the 4-line display mode, 3-line display mode, Clock display mode, or Spectrum analyzer Changing displayed information on each source display (Spectrum analyzer&Text type) mode which allows following; text display. Refer to <Display type select> (page 24). Press the [DISP] button. -
Page 28: Illumination Color Selection
Select “AUX”, “DVD”, “PORTABLE”, “GAME”, “VIDEO”, or Display “Display”/ “DISPLAY” “TV” “Key”/ “KEY” Exit Function setting mode Volume knob (DPX-U6120 only) “Knob” Press the [ ] button for at least 1 second. Select the Illumination Color ⁄ Turn the [VOL] knob and press it when the •... -
Page 29: Clock And Other Functions
Turn the [VOL] knob and press it when the DPX-MP3120 B.BOOST desired item is displayed. Select “Date Mode”. Function of DPX-U6120 Select Date format Clock and Date Adjustment Turn the [VOL] knob and press it when the desired item is displayed. You can adjust the clock and date. -
Page 30: Clock Adjustment
Select “2” to change the source selection : Factory setting) method. Press the [SRC] button, turn the [VOL] * Function of DPX-U6120 knob to select the source, and then press the ** Function of DPX-U5120/DPX-MP3120 [VOL] knob to determine it. -
Page 31: Demonstration Mode Setting
Demonstration mode Setting Muting volume upon reception of Phone call Turning the demonstration mode ON/OFF. The audio system automatically mutes upon Enter Function setting mode reception of an incoming call. Press the [VOL] knob. Enter Demonstration mode setting When a call comes in Turn the [VOL] knob and press it when the “CALL”... -
Page 32: Audio Adjustments - Dpx-U6120
Function of DPX-U6120 Audio Adjustments – DPX-U6120 – “Volume offset” Sets each source’s volume as a difference from the basic volume. “–8” — “±0” (AUX: “-8”— “+8”) “2Zone” Sets the Dual Zone System. - <Dual Zone System> (page 35). “2Zone Select”... -
Page 33: Preset Equalizer Curve Select
Preset Equalizer curve Select Manual Equalizer Control You can select the following Equalizer curve. You can adjust the following Equalizer Control items. Display Equalizer curve “Natural” Natural Band Item Range “User” User* “BAND1” (62.5 Hz) “GAIN” Band level -9 –+9 dB “Rock” Rock “EFCT” Bass Effect “ON”/ “OFF”... -
Page 34: Listening Position Selection
Function of DPX-U6120 Audio Adjustments – DPX-U6120 – Listening Position Selection Listening Position Fine Adjustments The sound environment can be compensated in Making fine adjustment of the value specified at accordance with the selected position. According to Preset position selection per speaker. the listening position, select the position from the Select the source following settings. -
Page 35: Dual Zone System
Dual Zone System Main source and sub source (Auxiliary input) output Front channel and Rear channel separately. Display Overview “2Zone Rear Volume”* Adjust the volume of Rear channel. “0” — “35” “Detailed Setup” “2Zone” Sets the Dual Zone System. “ON”/ “OFF” “2Zone Select”* Specifies the destination of sub source sound when the Dual Zone function is turned on. -
Page 36: Audio Adjustments - Dpx-U5120/ Dpx-Mp3120
(Left) “L15” — “0” — “R15” (Right) “FADER” Adjusts front/rear speaker balance. (Rear) “R15” — “0” — “F15” (Front) “SUB-W LEVEL” You can set subwoofer level. “–15” — “0” — “+15” DPX-U6120/ DPX-U5120/ DPX-MP3120... -
Page 37: Dsp Setup
Function of DPX-U6120 DSP Setup Speaker Setting The speaker X’Over is automatically set when the position and size of each speaker are selected from the following items. Speaker Item Range “Front” “SIZE” Speaker Size Front “O.E.M.”, “10cm”, “13cm”, “16cm”, “17cm”, “18cm”, “4x6”, “5x7”, “6x8”, “6x9”, “7x10”... -
Page 38: Car Type Fine Adjustments
Function of DPX-U6120 DSP Setup Car Type Fine Adjustments Reference point Adjusting fine tuning of the speaker position compensation value specified at <Car Type Selection> (page 37). Display Item Range FRONT FRONT 0 – 440 cm “FRONT” Front speaker 0 – 440 cm “REAR”... -
Page 39: Audio Preset Memory
Select “Audio Control” > “Detailed Setup” > When you press the Reset, all the sources will be the setting value which is registered. “X’Over”. • Preset number “1” and “2”: Select the speaker you want to set The memory cannot be erased by the Reset button. Turn the [VOL] knob and press it when the •... -
Page 40: Log Function
Function of DPX-U6120 Log Function Log Function item lock Locks the Log Function items to prevent them from being deleted automatically. Display the Log Function list Press the [LOG] button. Lock the Log Function item Turn the [VOL] knob to select item, and then press the [VOL] knob for at least 1 second. -
Page 41: Log Function Category Setting
Log Function category setting Tuner Log Function time setting Sets the function category to be logged. You can set the timing to log the station by the reception time. Enter Function setting mode Enter Function setting mode Press the [VOL] knob. Press the [VOL] knob. Select the Log Function setting mode Turn the [VOL] knob and press it when the Select the Tuner Log time set mode desired item is displayed. -
Page 42: Bluetooth Setup
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup “Bluetooth HF/ You can specify output speakers for hands-free Audio” voice communication and Bluetooth audio sound. “Front”: Outputs voice from the front speakers. “All”: Outputs voice from the front and rear speakers. -
Page 43: Registering Bluetooth Device
Registering Bluetooth device Select”. 2. Enter Special device registration mode To make your Bluetooth device (cell-phone) usable Press the [VOL] knob. with this unit, you need to register it (pairing). You A list is displayed. can register up to 5 Bluetooth devices to this unit. 3. -
Page 44: Registering Pin Code
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup Registering PIN Code Selecting the Bluetooth device You Wish to Connect By operating the Bluetooth device, specify the PIN code necessary for registering this unit. When two or more Bluetooth devices have already been registered, you need to select the Bluetooth Enter Bluetooth mode device you wish to use. -
Page 45: Deleting A Registered Bluetooth Device
Deleting a Registered Bluetooth Downloading the Phone Book device Download the phone book data from the cell- phone to this unit so that you can use the Phone You can delete a registered Bluetooth device. Book of this unit. Enter Bluetooth mode Press the [LOG] button for at least 1 second. To download automatically If the cell-phone supports a phone book Enter Bluetooth device deletion mode... -
Page 46: Adding A Voice Dialing Command
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) Bluetooth Setup Adding a Voice Dialing Command Select “PB Name Check” (Play) Press the [VOL] knob. Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. CompletedSelect “PB Name Delete” (Delete) Enter Bluetooth mode Delete a voice tag Press the [LOG] button for at least 1 second. -
Page 47: Sms (Short Message Service)
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory) SMS (Short Message Service) SMS (Short Message Service) The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving. -
Page 48: Basic Operations Of Remote Control
When the button is pressed again, the volume • Return to previous item: [ returns to the previous level. • Return to previous item: [ • Exit from mode: [EXIT] • Selection of item: [5]/[∞] • Determination: [ENT] • Enter Audio Control mode: [AUD] DPX-U6120/ DPX-U5120/ DPX-MP3120... - Page 49 Hands-free phone control Preparing the remote control unit (DPX-U6120 only) Pull the battery sheet out from the remote control unit to the direction of the arrow. Making a call • Enter Bluetooth mode: [ ] • Select a dialing method: [5]/[∞] ➜ [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢]...
-
Page 50: Appendix
¡% ¡P An online manual about Audio files is put on the site, www.kenwood.com/cs/ce/audiofile/. On this online manual, detailed information and notes which are not written in this manual are provided. Make sure to read through the online manual as well. - Page 51 In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. English...
-
Page 52: Accessories/ Before Installation
For safety’s sake, leave the mounting and wiring work to professionals. • If you experience problems during installation, consult your Kenwood dealer.Disconnect the battery’s negative terminal and make all electrical connections before installing the unit. • Insulate unconnected wires with vinyl tape or other similar materials. -
Page 53: Connecting Wires To Terminals
Brown (Mute control wire) Connect to the terminal that is grounded when either the MUTE telephone rings or during conversation. To connect the Kenwood navigation system, consult your ⁄ navigation manual. Orange/ White (Dimmer control wire) To car light control switch... -
Page 54: Installation
(M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model. Car Bracket Accessory3 (M5 × 7 mm) or Accessory4(M5 × 6 mm) Accessory2 (Only for NISSAN car) DPX-U6120/ DPX-U5120/ DPX-MP3120... -
Page 55: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by What might seem to be a malfunction in your unit some settings made on this unit. may just be the result of slight misoperation or miswiring. Before calling service, first check the •... - Page 56 Move another Bluetooth device away from this change the source to USB again. unit. Another Bluetooth device or profile is used for ✔ communication. The downloading of the Phone book or the SMS disconnects the sound. DPX-U6120/ DPX-U5120/ DPX-MP3120...
- Page 57 N/A Device/NA DEVICE: Err No Matching: • An unsupported USB device is connected. The voice tag is wrong. Voice cannot be • Connection to the iPod has failed. recognized because of an unregistered voice Remove the USB device and then tag, etc.
-
Page 58: Specifications
50 kHz step : 87.5 MHz – 108.0 MHz Maximum Supply current : 500 mA Usable sensitivity (S/N = 26dB) DPX-U6120: 8.1 dBf (0.7 μV/75 Ω) File System : FAT16/ 32 DPX-U5120/ DPX-MP3120: 11.2 dBf (1 μV/75 Ω) MP3 decode... - Page 59 • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. • The “AAC” logo is a trademark of Dolby Laboratories.