Removing The Battery(S) - Invacare Platinum Mobil User Manual

Table of Contents

Advertisement

Invacare® Platinum™ Mobile
When the concentrator is connected to an external power source
(whether the concentrator is turned on or off) the "last" or "highest"
segment B of the battery gauge A also flashes to show the battery is
charging. When the battery is fully charged, the fourth segment B of
the battery gauge A stops flashing and remains lit.
Battery Gauge for Uninstalled Battery(s)
When the battery D is removed from the concentrator, press the
battery status button C to show the status of the charge level on the
battery gauge A. Refer to the charge level B table in Reading the
Battery Gauge for Installed and Uninstalled Battery(s) in Setup.
26

3.3.4 Removing the Battery(s)

1.
Open the battery compartment door F of the concentrator B.
2.
Pull straight up on the lift ring E to remove the battery C from
the battery compartment D.
3.
If a second battery is being used (sold separately), remove it in
the same manner.
4.
Close the battery compartment door.
A steady audible beep will occur when all power sources
are removed from the concentrator. Refer to Shut Down
Alarms in Troubleshooting.
A battery can be removed without affecting the operation of the
concentrator as long as an external power source or a second
charged battery is installed.
1194969-A-00

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poc1–100bPoc1–100b-c

Table of Contents