Table of Contents
Advertisement
1.
Install the battery. Refer to Installing the Battery(s) in Setup.
2.
Connect AC power to the concentrator. Refer to External AC
Power in Setup.
3.
Monitor the battery charge level and charge until full. Refer to
Battery Gauge for Installed and Uninstalled Battery(s) in Setup.
4.
Disconnect the AC power adapter from the concentrator for
portable operation.
IMPORTANT
A concentrator will not turn on unless the battery is
charged.
– Connect the AC power to the concentrator and allow
battery to fully charge prior to first use.
– Refer to Specifications in Technical Data for
approximate charge times.
Charging the Battery(s) After Initial Charging
The installed battery(s) can be charged whether the
concentrator is on or off.
1.
For charging of the battery(s) after initial charging, do one of
the following:
•
Connect the AC power adapter (if charging from a wall
outlet). Refer to External AC Power in Setup.
•
Connect the DC power cable (if charging from a vehicle).
Refer to External DC Power in Setup.
•
Remove battery and charge with the optional External
Battery Charger accessory, Model POC1–115.
2.
Monitor the battery charge level and charge until full. Refer to
Battery Gauge for Installed and Uninstalled Battery(s) in Setup.
3.
Disconnect external power from the concentrator for portable
operation.
1194969-A-00
3.3.3 Reading the Battery Gauge for Installed and
Uninstalled Battery(s)
Battery Gauge for Installed Battery(s)
The battery gauge A shows the status of the installed battery charge
level when the concentrator is turned on and when the concentrator
is off but connected to an external power source. The number
of illuminated segments B of the battery gauge A indicates the
charge level of the installed battery. If two batteries are installed the
indicated charge level is that of the least charged battery.
Number of Lit Segments B B B
1
2
3
4
Setup
Charge Level
0–25% charge
26–50% charge
51–75% charge
76%-100% charge
25
Hide quick links:
Advertisement
Table of Contents
