SECTION 5—CABINET
Removing Cabinet
To prevent electrical shock, ALWAYS disconnect concentrator from electrical
outlet before servicing.
1. Turn power Off (O) and unplug the unit.
2. Remove the four mounting screws that secure cabinet assembly to the base assembly.
3. Lift the cabinet straight up.
NOTE: When required, vacuum inside of the cabinet and exposed foam insulation.
4. To re-install cabinet, reverse STEPS 2-3.
L
Part No 1118396
DANGER
Mounting
Screws
FIGURE 5.1 Removing Cabinet
25
SECTION 5—CABINET
Cabinet Assembly
Mounting
Screws
Base Assembly
®
Platinum
Oxygen