CompactFlash Memory Card Product Manual
6.1.6
Idle - 97H, E3H
Bit ->
7
Command (7)
C/D/H (6)
Cyl High (5)
Cyl Low (4)
Sec Num (3)
Sec Cnt (2)
Feature (1)
This command causes the CompactFlash Memory
Card to set BSY, enter the Idle (Read) mode, clear
BSY and generate an interrupt. If the sector count
is non-zero, it is interpreted as a timer count with
each count being 5 milliseconds and the automatic
6.1.7
Idle Immediate - 95H, E1H
Bit ->
7
Command (7)
C/D/H (6)
Cyl High (5)
Cyl Low (4)
Sec Num (3)
Sec Cnt (2)
Feature (1)
This command causes the CompactFlash Memory
Card to set BSY, enter the Idle (Read) mode, clear
BSY and generate an interrupt.
64
6
5
4
E3H or 97H
X
Drive
Timer Count (5 msec increments)
power down mode is enabled. If the sector count is
zero, the automatic power down mode is disabled.
Note that this time base (5 msec) is different from
the ATA specification.
6
5
4
E1H or 95H
X
Drive
SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION
3
2
X
X
X
X
X
3
2
X
X
X
X
X
X
1
0
1
0