CompactFlash Memory Card Product Manual
3.0 Installation
3.1
Mounting
The
CompactFlash
Memory
Card
may
be
installed in any platform with a 3M 50 position
Surface Mount Interface Header (3M P/N N7E50-
7516VY-20) and Ejector (3M P/N D7E50-7316-02),
or equivalent, properly installed. Refer to the
appendix at the end of this manual for additional
technical information.
In addition, the CompactFlash Memory Card may
be used in any standard PCMCIA Type II (5 mm) or
Type III (10.5 mm) socket as supplied by an OEM
using the optional SanDisk PCMCIA Adapter
SDCF-03.
20
SanDisk CompactFlash Memory Card Product Manual © 1998 SANDISK CORPORATION