Using The Setup Wizard - D-Link DFL-200 Quick Installation Manual

Using The Setup Wizard

To obtain a new IP address from the DFL-200 you may need to restart your computer or
release and renew your IP address. First make sure that the network adapter in your
computer is configured properly. Instructions for configuring the network adapter to
obtain an IP address automatically from the DFL-200 can be found in the Appendix.
The DFL-200 provides Web based configuration. You can configure your DFL-200 using
a Web browser such as Internet Explorer or Netscape Navigator in Windows, Macintosh,
or UNIX based environments.
Open your Web browser and type
http://192.168.1.1
address box. Then press the Enter
or Return key.
The IP Address shown in the example above is the default setting. The DFL-200 Connection
Wizard only appears upon initial connection to the unit and can be reinvoked by resetting
the unit to the factory default settings (Note: Resetting the unit to the factory default
settings will erase any changes you have made to the unit).
Welcome to the DFL-200 connection wizard!
Here you can choose to either
configure your firewall over HTTP or
over Secure HTTP (HTTPS).
Click on Connect to the unit via
HTTPS instead
Click Next to keep using HTTP
into the URL
to use Secure HTTP
4