Speeding Up Output For Narrow Media - Roland soljet pro4 xf 640 User Manual


VACUUM POWER
AUTO 90%
A larger value produces a larger suction force. For the media easy to be loose due
to warping or winkling, increase of the suction force may help correct the problem.
0 to 100%
When the media is flimsy and cannot move smoothly, reduction of the suction force
may correct such the problem.
AUTO
The suction force is automatically adjusted to the optimal level for the media width.

Press
Description
The platen uses suction to grip the media and keep it stable. The suction force can be adjusted corresponding
to the mature and condition of the media. You can also make this setting on the software RIP. When you have
made the setting on the software RIP, the RIP's setting is used and the printer's setting is ignored.
Default Setting
[VACUUM POWER]: AUTO

Speeding Up Output for Narrow Media

Procedure

Press .

MENU
SUB MENU

SUB MENU
FULL WIDTH S

FULL WIDTH S
FULL OFF
SHEET
"SHEET" matches the range of the print heads movement to the width of the media.
"OFF" matches the range of the print heads movement to the output data. Movement
is limited to the minimum amount necessary, and this can be expected to yield the
OFF
fastest output. Note, however, that because the speed of media movement is no
longer constant, colors may be uneven.
This makes the speed of media movement constant at all times and produces the
FULL
most stable printing result.
Accommodating to the Types and Condition of Media
Press
Press to enable the setting.
in this order to go back to the original screen.
Press several times to display the screen shown
on the left.
Press .
Press several times to display the screen shown
on the left.
Press .
Press
Press to enable the setting.
to select a value.
to select an item.
4
107