Press
.
CLEANING. . .
> > > > >
NORMAL CL.
A B
_
Press
Perform a printing test again to make sure the dot drop-out has been corrected.
If the problem persists, try performing cleaning a second time. If the printer has been used for a long period,
the problem may persist even after two or three-cycle cleaning. Then try cleaning using a different method.
P. 68, "When Normal Cleaning Is Not Effective"
When You Want to Clean All Print Heads Simultaneously
Hold down
for one second or longer. Cleaning for all print heads starts automatically.
Getting Ready to Receive Data from a Computer
When P. 34, "Loading Media" and P. 55, "Getting Ready to Receive Data from a Computer" are completed,
get ready to receive the data from a computer.
CAUTION
Procedure
Close the front cover.
Make sure
If
is not lit, down the loading lever and press
Wait until
The screen shown in the figure appears and cleaning starts.
When it finishes, the screen shown in the figure appears again.
in this order to go back to the original screen.
Never touch the print heads while output is in progress.
The print heads move at high speed. Hitting may cause injury.
stays steadily lit.
stays steadily lit.
Outputting
.
2
55