Honda HRM300/500 Owner's Manual page 7

Laying boundary wire
The boundary wire location determines the parameters of the mowing area, this area
may consist of multiple zones in which the lawnmower can operate. For mowing zone
setup and detailed information please see "4 MENU SETTINGS" (M page 14).
Leave 5 mm of space or less
between parts of the boundary wire.
Make sure that parts of the boundary
wire do not overlap or cross.
Leave 30 cm to 50 cm
of space between the
boundary wire and
large objects.
Safety
Blades on the lawnmower
automatically stop when:
- You lift the lawnmower.
- The lawnmower is on a surface
with a slope that is too steep.
- The lawnmower becomes
overturned.
Leave 30 cm to 50 cm
of space between the
boundary wire and the
mowing zone boundary.
Lay boundary wire
around objects
that you want the
lawnmower to
avoid.
Quiet operation
The motor and rotating blades of
the Honda Robotic Lawnmower
operate much quieter than
traditional engine lawnmowers.
How the Honda Robotic Lawnmower works / Features
Do not lay boundary wire so that it intersects on a
slope of more than 10° (17%).
You can lay boundary wire parallel to a slope of more
than 10° (17%) in order to access an area with a
slope of less than 10° (17%).
Incorrect
More than
10° (17%)
Correct
Less than
10° (17%)
5