Other System Settings; Basic Docking Station Settings - Honda HRM300/500 Owner's Manual

Other system settings

Other system settings

Basic docking station settings

Configure docking station settings.
Selecting the signal pattern for the docking station
Home screen
[1.Station Signal]
This setting is directly linked with the boundary wire
connection combination (type 1, 2, 3 or 4)
You can change the signal pattern that the
lawnmower receives from the docking station.
This is useful for avoiding signal interference with
other lawnmowers.
Designating the lawnmower movement direction
Home screen
[2.Loop Direction]
This setting is directly linked with the boundary wire
connection combination (type 1, 2, 3 or 4).
You can set the direction for the lawnmower to move
in relation to the docking station.
34
[6.System Setup]
J
(M page 12).
[6.System Setup]
J
[1.Station Setup]
J
Select a different type of signal if you are
1
experiencing interference.
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
[1.Station Setup]
J
Select [1.Clockwise(CW)] or
1
[2. Anticlockwise(ACW)].
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
J
J