Quick Setup; Setting The Work Day And Work Time - Honda HRM300/500 Owner's Manual

Quick Setup

With this function, you can change the settings for Quick Setup.
NOTE:
- Quick Setup may not perform as desired if you have multiple zones to mow, etc. In this case, use Custom
Setup (M page 22).

Setting the work day and work time

You can select the day and time on which you want the
lawnmower to operate.
Home screen
Configure this setting to have the lawnmower operate
on specific days and times.
You can set up to two times for operation.
Confirm the day selection
and display the screen
for setting the time.
Select the day.
[2.Quick Setup]
J
Quick Setup
Ti m e r
0 . O K 9 . S e l e c t A l l
1 . M o n d a y
2 . Tu e s d a y
3 . We d n e s d a y
4 . T h u r s d a y
Quick Setup
Ti m e r
S t a r t
Ti m e r 1 11 : 0 0 - 11 : 4 5
Ti m e r 2 0 0 : 0 0 - 0 0 : 0 0
[1.Timer]
J
Select the day on which you want the
1
lawnmower to operate.
Add a check to the box by pressing the H
2
button.
Select [0.OK].
3
Press the H button to proceed to the
4
timer setting screen.
Enter a start time and an end time in
5
24-hour format for [Timer 1] using the
number buttons.
If necessary, also enter a start time and
6
an end time in 24-hour format for [Timer
2].
Press the H button.
7
The message "Activated" is displayed.
Press the H button to return to the
8
previous screen.
S u n
1 3 : 2 7
Select all days.
This mark indicates that
there is another page.
Use the E / F buttons
to change pages.
S u n
1 3 : 2 7
E n d
Set the time.
Quick Setup
17