Manual Mode Setup Settings - Honda HRM300/500 Owner's Manual

Other system settings

Manual Mode Setup settings

Configure the mowing pattern and how far the lawnmower can overlap the
boundary wire for manual mode.
Setting the mowing pattern
With the [1.Random] setting, when the
lawnmower detects the boundary wire,
it turns at a wide angle. This is the most
effective for mowing a large open area of
grass. For normal operation, use this setting.
Home screen
[1.Mowing Pattern]
You can adjust how the lawnmower moves while
mowing.
The [3.Mixed] setting is also available. With this
setting, the lawnmower alternates between the
Random mowing pattern and the Directional mowing
pattern at regular intervals.
Setting how far the lawnmower can overlap the boundary wire
Home screen
[2.Area]
When the lawnmower detects the boundary wire,
it can slightly cross the boundary to mow the outer
edges of the mowing area. You can adjust how far is
crosses the boundary wire.
36
[6.System Setup]
J
[6.System Setup]
J
With the [2.Directional] setting, when
the lawnmower detects the boundary
wire, it turns at a narrow angle. This is
used for mowing narrow areas.
[2.Manual Mode Setup]
J
Select [1.Random], [2.Directional] or
1
[3.Mixed].
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
[2.Manual Mode Setup]
J
Enter the number setting from 20 to 45.
1
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
J
J