Testing Settings; Confirming The Boundary Wire Signal - Honda HRM300/500 Owner's Manual

Copying Quick Setup mode settings to Custom Setup mode
Home screen
[4.Copy Quick Setup]
You can copy day and time settings from Zone 2 in
Quick Setup mode.

Testing settings

Confirming the boundary wire signal

You can check if the boundary wire signal is correctly reaching the lawnmower
and confirm how strong the signal is.
Home screen
Area sensor indication
Lv0
Lv1
Lv5
Lv10
[3.Custom Setup]
J
[4.Test] [1.Check Area Wire]
J J
[4.Reset]
J J
Select [1.Yes].
1
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
Signal strength
No loop signal
Weak
Moderate
Strong
Testing settings
29