Honda HRM300/500 Owner's Manual page 27

Setting the mowing pattern
Home screen
[1.Zone 1] ~ [5.Zone 5]
With the [1.Random] setting, when the
lawnmower detects the boundary wire,
it turns at a wide angle. This is the most
effective for mowing a large open area of
grass. For normal operation, use this setting.
You can adjust how the lawnmower moves while
mowing.
The [3.Mixed] setting is also available. With this
setting, the lawnmower alternates between the
Random mowing pattern and the Directional mowing
pattern at regular intervals.
Setting how far the lawnmower can overlap the boundary wire
and how far the inner-boundary-wire overlap distance is when
the lawnmower follows the boundary wire
Home screen
[1.Zone 1] ~ [5.Zone 5]
When the lawnmower detects the boundary wire,
it can slightly cross the boundary to mow the outer
edges of the mowing area. You can adjust how far it
crosses the boundary wire.
Furthermore, you can set how far inward from the boundary wire the lawnmower will
move when the lawnmower is following the boundary wire (such as when it goes to the
work area).
[3.Custom Setup]
J
[3.Mowing Pattern]
J
[3.Custom Setup]
J
[4.Area]
J
[2.Zone]
J J
With the [2.Directional] setting, when
the lawnmower detects the boundary
wire, it turns at a narrow angle. This is
used for mowing narrow areas.
Select [1.Random], [2.Directional] or
1
[3.Mixed].
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
[2.Zone]
J J
[1.Wire Overlap]
J
Enter a value from 20 to 45.
1
Press the H button.
2
The message "Activated" is displayed.
Press the H button to return to the
3
previous screen.
Custom Setup
25