Technical Data - Miele G 7883 Operating Instructions Manual

Technical data

Height with lid
Height without lid
Width
Depth
Depth with door open
Weight (net)
Voltage, connected load, fuse rating
Mains cable
Water temperature:
Cold water
Hot and DI water
Static water pressure
Minimum flow pressure:
Cold/hot water inlet connections
DI water connection
Recommended flow pressure:
Cold/hot water inlet connections
DI water connection
DI-water connection (non-pressurised)
Delivery head
Ambient temperature
Relative humidity
Decreasing proportionately to
Altitude
Degree of soiling
Protection category (according to IEC
60529)
Noise level in dB (A), Sound level LpA
during cleaning and drying phases
Approvals
Manufacturer's address
* If installed at altitudes above 1500 m the boiling point of the suds solution will be lower. Disinfecting
temperature parameters should be lowered and the holding time increased. This must be done by a
Miele service technician.
74
85 cm
82 cm
60 cm
60 cm
120 cm
70 kg
See data plate
Approx. 1.8 m
Max. 20 °C
max. 70 °C
Max. 1000 kPa (145 psi) pressure
100 kPa pressure
60 kPa pressure
0 250 kPa pressure
0 150 kPa pressure
optional, 8.5 - 60 kPa
min. 0.3 m, max. 1 m
5 °C to 40 °C
80 % for temperatures to 31 °C
50 % for temperatures to 40 °C
Max. 1500 m *
P2 (according to IEC/EN 61010-1)
IP20 (Dust permeation)
< 70
CSA full appoval
Miele & Cie. KG, Carl-Miele-Str. 29,
33332 Gütersloh, Germany