Miele G 7883 Operating Instructions Manual page 56

Problem solving guide
Fault
The Add salt indicator
light "Recharging"
flashes.
A few minutes after the
start of a programme,
the "Fill/Drain"
indicator flashes and
the programme is
cancelled.
56
Possible cause
The salt reservoir has not
been replenished,
meaning that the water
softener could not be
reactivated.
Fault code F..E:
There is a water inlet
fault.
Remedy
Fill carefully with reactivation
salt.
Before trying to rectify the
problem, you must:
– Turn the programme
selector to f (the fault
code goes out).
– Switch the machine off with
the "On/Off" switch.
– Open the stopcock.
– Clean the water inlet filter;
see "Other problems".
– The water pressure at the
intake is too low. Ask a
plumber for advice.
Then:
– Switch the machine on.
– Start the programme
again.