Warning And Safety Instructions - Miele G 7883 Operating Instructions Manual

Laboratory glassware washer
Table of Contents

Advertisement

This machine complies with all
relevant local and national safety
requirements. Please note that
incorrect use can lead to personal
injury and damage to property.
To avoid the risk of accidents and
damage to the machine please read
these instructions carefully before
starting to use it. Keep these
instructions in a safe place for
reference, and pass them on to any
future user.
Correct application
~
This lab washer is designed for use
with the applications described in these
Operating Instructions only. Alterations
or conversions to the machine or using
it for purposes other than those for
which it was designed are not
permitted and could be dangerous.
This machine must only be used for
cleaning and disinfecting laboratory
utensils if the manufacturer has stated
that they are suitable for machine
processing. Follow the manufacturer's
instructions. Miele cannot be held liable
for damage caused by improper or
incorrect use of the machine.
~
This machine is intended for indoor
use only.
~
This machine may only be used in
mobile installations if a risk assessment
of the installation has been carried out
by a suitably qualified engineer.

Warning and safety instructions

Please pay attention to the following
notes to avoid injury and damage.
~
This machine should be
commissioned and then maintained by
a Miele service technician only. A Miele
service contract is recommended to
ensure compliance with GLP
Guidelines. Unauthorised repairs could
be dangerous and jeopardise the
personal safety of the operator, for
which the manufacturer cannot be held
liable.
~
Do not install the machine in an area
where there is any danger of explosion
or of freezing conditions.
~
The electrical safety of this machine
can only be guaranteed if connected to
a correctly installed earthing system on
site. It is most important that this basic
safety requirement is present and
tested regularly, and where there is any
doubt the on-site electrical system
should be inspected by a qualified
electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
~
A damaged or leaking machine
could be dangerous and compromise
your safety. Disconnect the machine
from the mains immediately and call the
Miele Service Department.
~
Personnel operating the machine
should be trained regularly. Untrained
personnel and children must not be
allowed access to the machine or its
controls.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents