Filling The Salt Reservoir - Miele G 7883 Operating Instructions Manual

Filling the salt reservoir

Only use special coarse grained
reactivation salt with granules of
approx. 1 - 4 mm, e.g. Miele Softener
Salt. Do not use other types of salt such
as cooking salt, agricultural grade or
gritting salt. These may contain
insoluble additives which can impair
the functioning of the water softener. If
in doubt consult the Miele Professional
Department.
The salt reservoir holds approx.
2.5 kg of salt.
,
Inadvertently filling the salt
reservoir with cleaning agent will
damage the water softener.
Before filling the salt reservoir make
sure that you have picked up the
right packet of reactivation salt.
^ Remove the bottom basket from the
machine.
^ Unscrew the salt reservoir cap.
Before filling the salt reservoir with
reactivation salt for the first time, you
must fill it with approx. 2.5 litres of
water to enable the salt to dissolve.
Once the lab washer has been
used, there is always sufficient water
in the reservoir.
^ Place the funnel provided in position.
^ Fill carefully with salt.
As it is poured in, displaced water will
run out.
Water softener
17