November 2008
REV B
C-3
Replace the Hydraulic Tank
Breather Cap - Models with
Optional Hydraulic Oil
Genie requires that this procedure be performed
every 500 hours or six months, whichever comes
first.
The hydraulic tank is a vented-type tank. The
breather cap has an internal air filter that can
become clogged or, over time, can deteriorate. If
the breather cap is faulty or improperly installed,
impurities can enter the hydraulic system which
may cause component damage. Extremely dirty
conditions may require that the cap be inspected
more often.
1 Remove and discard the hydraulic tank breather
cap.
2 Install and new cap onto the tank.
Part No. 112657
Section 3 • Scheduled Maintenance Procedures
C-4
Perform Engine Maintenance -
Diesel Models
Engine specifications require that this procedure
be performed every 500 hours.
Required maintenance procedures and additional
engine information is available in the
Kubota D1105 Operator's Manual
(Kubota part number 16622-89166) OR the
Kubota D905 Operator's Manual
(Kubota part number 16622-8916-5) OR the
Perkins 403D-11 User's Handbook
(Perkins part number SEBU8311-01) OR the
Perkins 403C-11 User's Handbook
(Perkins part number 100816460).
Kubota D1105 Operator's Manual
Genie part number
Kubota D905 Operator's Manual
Genie part number
Perkins 403D-11 User's Handbook
Genie part number
Perkins 403C-11 User's Handbook
Genie part number
GS-2668 RT • GS-3268 RT
CHECKLIST C PROCEDURES
131379
84240
131661
97360
3 - 27