Operation During Recording - Panasonic Diga DMR-BW850 Operating Instructions Manual

Operation during Recording

Check the recording
programme
Switch the input
Switch to other channel
Display the recording
programme on the TV
screen
To stop recording
To pause recording
Perform 2 programmes
simultaneous recording
Press [STATUS ].
e.g., while 2 programmes simultaneous recording
Press [INPUT SELECT].
Press [ CH].
1 2
It is necessary to display the recording programme onto the TV screen to perform operations such as
pause.
If the input was switched: Press [INPUT SELECT].
If the channel was switched: Press [ 1 2 CH].
If the drive was switched: Press [DRIVE SELECT].
It is necessary to display the programme you want to stop on the TV screen. (➡ above)
Press [ ].
g
From the start to the end of the recording is called one title.
It is necessary to display the programme you want to pause on the TV screen. (➡ above)
Press [ ].
h
Press again to restart recording.
You can also press [ * REC] to restart.
(Title is not split into separate titles.)
If paused while recording in DR mode, the paused part may become a still picture for a moment during
playback of that programme.
Record other programme with steps 1–4 on page 22.
One of the 2 programmes needs to be digital broadcasting recorded with DR mode.
"Manual recording" is also available. (➡ 56)
Channel switch / input switch while performing 2 programmes simultaneous recording will switch
between the 2 recording programmes.
Recording programme
displayed on the TV screen
Recording programme not
displayed on the TV screen
unit's display;
"REC1" and "REC2" will light.
REC1
REC2
HDD
REC1
001 TV ONE
002 TV2 REC2
RQT9433
31