Dimmer Speed; Color Balance; Reset Functions; Factory Reset - Chauvet ROGUE R1 FX-B User Manual

Operation

Dimmer Speed

To set the dimmer speed, do the following:
1.
2.
3.
4.
5.
PWM Option To set the PWM frequency, do the following:
1.
2.
3.
4.
5.
To set the maximum values of a given color in the mix, follow the instructions below:

Color Balance

1.
2.
3.
4.
5.
6.
7.
8.
To reset the pan, tilt, or all functions as if from startup:
Reset
1.
Functions
2.
3.
4.
5.
6.
7.

Factory Reset

To restore the Rogue R1 FX-B to factory default settings, do the following:
1.
2.
3.
4.
5.
-52-
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Dimmer Speed, or touch the display where it says Dimmer
Speed.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Smooth or Fast, or touch the display
where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select PWM Option, or touch the display where it says PWM Option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select 600Hz, 1200Hz, 2000Hz, 4000Hz,
6000Hz, or 25000Hz, or touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Color Balance, or touch the display where it says Color
Balance.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN>, to select the color value to be changed, from Red, Green, Blue, or
White, or touch the display where it says the desired option.
If using the buttons instead of the touchscreen, press <ENTER>.
Set the color value with one of the following methods:
·
Type the desired value using the number pad that shows on the touchscreen display.
or
·
Use <UP>, <RIGHT>, <DOWN>, or <LEFT> to increase or decrease the value.
Press <ENTER>.
Repeat steps 4–7 until color balance is set as desired.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Reset Function, or touch the display where it says Reset
Function.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select the function to reset, from Pan, Tilt, or All, or touch the display
where it says the desired option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from NO (do not reset) or YES (reset), or
touch the display where it says the desired option.
Press <ENTER>.
Navigate to the Setup menu.
Use <UP> or <DOWN> to select Factory Settings, or touch the display where it says Factory
Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select NO (do not reset) or YES (reset to factory
settings), or touch the display where it says the desired option.
Press <ENTER>.
Rogue R1 FX-B User Manual Rev. 2