Firmware Update - Chauvet ROGUE R1 FX-B User Manual

Firmware Update

5. F
IRMWARE
The following steps apply to the Windows® 7 operating system:
Step 1
1. Connect the Rogue R1 FX-B to a computer with
an ethernet cable.
2. Verify the network with the Rogue R1 FX-B is
connected to the computer.
Step 2 1. Set the control protocol on the Rogue R1 FX-B to
ArtNet in Single Control mode. (See Single
Control Protocol)
2. Set the IP Mode to Static. (See IP Mode)
Step 3 On the computer, open the Network and Sharing
Center (through the Start Menu, the Control Panel, or
the Network icon on the right side of the Taskbar).
Step 4 Select the network which the product is connected to
by clicking the blue text that corresponds to that
network on the right side of the window.
-54-
U
PDATE
Rogue R1 FX-B User Manual Rev. 2