Dual Control Pixel; Dual Control Pixel Protocol; Dual Control Pixel Personality; Dual Control Pixel Start Address - Chauvet ROGUE R1 FX-B User Manual

Dual Control The Pixel protocol controls the individual output of the LEDs. Choose from DMX, Art-Net™, sACN,
or Kling-Net. In this mode, the two personalities available are RGB (15 channels), and RGBW (20
Pixel
channels).

Dual Control Pixel

To select the Dual Control Pixel protocol, follow the instructions below:
Protocol 1.
2.
3.
4.
5.
6.
7.
8.
9.
Dual Control Pixel
To select the Dual Control Pixel personality, set the Protocol, then do the following:
Personality 1.
2.
3.
4.
Dual Control Pixel To set the starting address of the Dual Control Pixel mode, set the Protocol, then follow the
Start Address
instructions below:
1.
2.
3.
4.
Dual Control Pixel To set the Universe address of the Dual Control Pixel mode when using Art-Net™ or sACN, set the
Universe Protocol to ArtNet or sACN, then do the following:
1.
2.
3.
4.
Rogue R1 FX-B User Manual Rev. 2
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Dual Control, or touch the display where it says Dual Control.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Pixel, or touch the display where it says Pixel.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from DMX, ArtNet, sACN, or KlingNet, or
touch the display where it says the desired protocol option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from RGB (15-channel) or RGBW (20-
channel), or touch the display where it says the desired personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start
Address.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the starting address (001–512) with one of the following methods:
·
Type the address number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
Press <ENTER>.
Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
·
Type the universe number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe is set as desired.
Press <ENTER>.
Operation
-15-