Signal Connections; Art-Net™ Connection; Sacn Connection; Kling-Net Connection - Chauvet ROGUE R1 FX-B User Manual

Signal Connections

Art-Net™
Connection
sACN
Connection
Kling-Net
Connection
Connection
Diagram
Rogue R1 FX-B User Manual Rev. 2
The Rogue R1 FX-B can receive DMX, Art-Net™, sACN, or Kling-Net signal. The Rogue R1
FX-B has 2 Neutrik® etherCON® through ports, and 3- and 5-pin DMX in and out ports. For
more information about DMX, read the DMX primer at:
http://www.chauvetlighting.com/downloads/DMX_Primer_Rev9_ML_WO.pdf.
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512
data using an Neutrik® etherCON® RJ45 connection over a large network. An Art-Net™
protocol document is available from www.chauvetprofessional.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
Also known as ANSI E1.31, streaming ACN is an Ethernet protocol that uses the layering and
formatting of Architecture for Control Networks to transport DMX512 data over IP or any other
ACN compatible network. ACN is maintained by the Professional Lighting and Sound
Association (PLASA).
Kling-Net is a network protocol that allows auto configuration of display devices using a
Neutrik® etherCON® RJ45 Ethernet connection. Refer to the ArKaos software manual for
detailed instructions on programming this product.
ArKaos Kling-Net does not support the pan and tilt functions, and must be paired with
another protocol for full functionality with the Rogue R1 FX-B.
Computer/Controller
(running Art-Net™,
sACN, or Kling-Net
protocol)
The three LED indicators in between the Amphenol XLRnet ports indicate a connection to a
network and activity on that network. They do not indicate whether or not the
Rogue R1 FX-B is receiving a signal from a controller.
Switch or Router
(such as the NET-Switch
from CHAUVET Professional)
Setup
Rogue R1 FX-B
To other Art-Net™, sACN,
or Kling-Net Devices
-7-