Protocol Configuration; Single Control; Single Control Protocol; Single Control Personality - Chauvet ROGUE R1 FX-B User Manual

Protocol Configuration

The Rogue R1 FX-B can be set to respond to DMX, Art-Net™, sACN, Kling-Net, or a combination of
those protocols. The protocol configuration must be set for the product to respond correctly to the
controller(s). See the Menu Map for more information.

Single Control

In Single Control mode, the Rogue R1 FX-B is controlled by a single protocol input. Choose from
DMX, Art-Net™, or sACN. In this mode, the four personalities available are Basic (18 channels),
Standard (25 channels), Advanced (47 channels), and TOUR (47CH).
Single Control To select the Single Control protocol, follow the instructions below:
1.
Protocol
2.
3.
4.
5.
6.
7.
Single Control To select the Single Control personality, set the Protocol, then do the following:
1.
Personality
2.
3.
4.
To set the starting address of the Single Control mode, set the Protocol, then follow the instructions
Single Control
below:
Start Address
1.
2.
3.
4.
Single Control To set the Universe address of the Single Control mode when using Art-Net™ or sACN, set the
Protocol to ArtNet or sACN, then do the following:
Universe
1.
2.
3.
4.
Rogue R1 FX-B User Manual Rev. 2
Press <MENU> repeatedly until the Home Screen shows on the display. Press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select Control Settings, or touch the display
where it says Control Settings.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Single Control, or touch the display where it says Single
Control.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select from DMX, ArtNet, or sACN, or touch the display where it says
the desired protocol option.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Personality, or touch the display where it says Personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP>, <DOWN>, <LEFT>, or <RIGHT> to select from Basic (18-channel), Standard (25-
channel), Advanced (47-channel), or TOUR (47CH), or touch the display where it says the
desired personality.
If using the buttons instead of the touchscreen, press <ENTER>.
Use <UP> or <DOWN> to select Start Address, or touch the display where it says Start
Address.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the starting address (001–512) with one of the following methods:
·
Type the address number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the address is set as desired.
Press <ENTER>.
Use <UP> or <DOWN> to select Universe, or touch the display where it says Universe.
If using the buttons instead of the touchscreen, press <ENTER>.
Enter the universe address (0–254 for ArtNet, 0–255 for sACN) with one of the following
methods:
·
Type the universe number using the number pad that shows on the touchscreen display.
or
·
Using the buttons (or the button icons on the sides of the display),
a. Use <LEFT> or <RIGHT> to select the digit to be altered.
b. Use <UP> or <DOWN> to increase or decrease the number value of that digit.
c. Repeat until the universe is set as desired.
Press <ENTER>.
Operation
-13-