Static Colors Defined; Configuration (Standalone); Sound-Active Mode; Automatic Mode - Chauvet Kinta FX User Manual

Static Colors Defined

Program Effect
C001 Red
C002
Green
C003 Blue
C004 White
C005 Red / Green
C006 Red / Blue
C007
Red / White
C008
Green / Blue
C009 Green / White
C010 Blue / White
C011 Red / Green / Blue
C012 Red / Green / White
C013
Red / Blue / White
C014
Green / Blue / White
C015 Red / Green / Blue / White
Configuration
(Standalone)
Sound-Active
Mode

Automatic Mode

Speed
Adjustment
Page 20 of 117
Set the product in one of the Standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any Standalone mode (Static, Automatic, or
Sound) to a DMX string connected to a DMX controller. Products in Standalone mode may
transmit DMX signals that could interfere with the DMX signals from the controller.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER> and Snd1–Snd7 will show on the display.
3. Use <UP> or <DOWN> to select the desired Sound-Active program.
4. Press <ENTER>.
5. Turn the music on and adjust the sound sensitivity knob until the product starts responding to
the beat of the music.
The product will only respond to low frequencies of music (bass and drums).
The product will blackout when in Sound-Active mode after 3 seconds of silence or noise
below the sensitivity setting.
To enable the Automatic mode, follow the instructions below:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P001–P007 will show on the display.
3. Use <UP> or <DOWN> to select the desired Auto program.
4. Press <ENTER>.
To change the speed of Auto or Sound-Active mode, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Press <ENTER> and S.00–S.99 will show on the display.
3. Use <UP> or <DOWN> to adjust the program speed.
4. Press <ENTER>.
Kinta FX User Manual Rev. 1