Electrical System (12-V Dc); Lights; Fuses; Wiring And Connections - Hobart 90 C 20 Operation And Maintenance Manual

(3) Replace any defective parts at once.
WARNING: EXHAUST FUMES OR FIRE CAN KILL OR INJURE! IMMEDIATELY
REPAIR DEFECTIVE EXHAUST SYSTEMS.

3.Electrical System (12-V DC)

A. Lights
Check all lights for proper operation DAILY. Replace any defective lamps (bulbs) as soon as discovered.
Figure 2 lists ALL lamps, their location, and part numbers.
B. Fuses
Check and replace fuses as required. See Figure 3 for fuse sizes and locations. Figure 3 includes all
fuses used in both the engine and generator electrical systems.
Light
Identification
Instrument Panel

Lights

Engine ON Indicating
Light
Contactor CLOSED
Indicating Light
Fault Indicating
Lights
Clearance Lights
C. Wiring and Connections
(1) Inspect all cables and leads for broken, worn, and damaged insulation.
August 5/89 Revised
Location
Control Box
Engine Control
Panel
Engine Control
Panel
Protective Relay
Tray
Canopy
Lamp Identification Chart
Figure 2
Lamp Lamp
Manufacturer Number
Lamp Industry 63
Trade No.
Lamp Industry 1815
Trade No.
Lamp Industry 1815
Trade No.
Lamp Industry 1815
Trade No.
Lamp Industry 57
OM-2031
2-2
Page 3