Table of Contents
Advertisement
OM-2031
INTRODUCTION
This manual contains operation and maintenance information for a series of 400-Hertz generator sets
manufactured by Hobart Brothers Company, Power Systems Group, Troy, Ohio 45373.
This manual is not intended to be a textbook on electricity or electronics. Its primary purpose is to provide
information and instructions to experienced operators, electricians, and mechanics who have never seen or
operated this equipment. It is the intent of this manual to guide and assist operators and maintenance people
in the proper use and care of the equipment.
Use of the manual should not be put off until a trouble or need for help develops. Read the instructions before
starting the unit. Learn to use the manual and to locate information contained in it. Its style and arrangement
are very similar to commercial aircraft manuals. The manual is divided into six chapters. Each chapter is
divided into as many sections as required. Each new section starts with page 1. Each page is identified by
chapter, section and page number, which are located in the lower, outside corner. When information located
in another portion of the manual is referred to, its location is identified by a chapter, section, and paragraph, or
figure number. For example, " (See 2-3, Para. B)" refers to information located in Chapter 2, Section 3,
Paragraph B. If a Chapter and Section are not indicated in a reference, the referenced material is located in
the same section as the reference, Example, (See Para. B).
In addition to operation and maintenance instructions, the manual contains an illustrated parts list in Chapter
4, and a collection of manufacturer's literature and supplemental information in Chapter 6.
Content of the manual is arranged as follows:
Chapter 1. Description/Operation
Chapter 2. Servicing
Chapter 3. Troubleshooting
Chapter 4. Illustrated Parts List
Chapter 5. Optional Equipment
Chapter 6. Manufacturer's Literature
August 5/89 Revised
Introduction
Page 1
Advertisement
Table of Contents
