Table of Contents
Advertisement
11. Service Helps
A. Wiring
All small wire leads are routed through plastic flexible conduit which protects them and makes a neat
easily removable and replaceable wiring harness arrangement. This wiring method allows the
replacement of a single wire lead with a minimum of difficulty. All wires are color coded.
B.Control Box Trays
Control box trays may be removed easily and moved to a work bench for service or replacement of
parts.
(1) Tray removal
(a) Loosen screw-lock fastener (2, Fig. 6)
(b) Slide tray outward and disconnect Amphenol connector (3).
(c) Support tray with hands at each side of tray near latches (1). Unlock latches (1) by pressing
down with thumbs, then slide tray out of box.
(2) Tray installation
(a) Use both hands to support tray as in removal above.
(b) Align rails (4) with tracks (5) and slide tray into box. Latches will lock automatically.
(c) Connect Amphenol connector (3).
November 18/91 Revised
OM-2031
1. Latch
2. Fastener
3. Connector
4. Rail
5. Track
Tray Removal (Typical)
Figure 6
Page 11
2-1
Advertisement
Table of Contents
